News

Product Categories

Hot Key Words

Contact Us

Jiangsu Yongyu Auto Parts Co., Ltd.

Address: Yancheng Sheyang Bay Bay Road, No. 188

Tel: 0515-88876377

Fax: 0515-88875377

Contact: Xu Wenkai

Mobile: 13770046388

E-mail: [email protected]

Zip code: 224000

Website: www.jsyongyu.com


Automotive clutch plate installation and adjustment steps

Your current location: Home >> News >> Company News

Automotive clutch plate installation and adjustment steps

Release date:2017-05-28 Author:Jiangsu Yong Yu Auto Parts Co., Ltd. Click:

Automotive clutch plate installation and adjustment steps

Automotive clutch film is our company's main production and management products, its use has become a favorite of workers. Do you know what its structure looks like? How does it work? What do you know about these? Come and follow us to find out.

Clutch pedal has stepped on, but the gear is difficult, the gear has a crash sound. If it is too thick, place a pad between the clutch cover and the flywheel. For hydraulically driven clutches, in addition to the above checks, check for any lack of brake fluid, seepage of the piping and discharge of air from the hydraulic system. Check clutch pedal free travel is too large, and adjust. Check the separation lever height is consistent, is too low. In the car dial separation fork, so that the front end of the separation bearing gently lean on the inner end of the separation lever, turn the clutch to view a week, if the separation of the inner end of the lever can not contact with the separation of bearings, indicating the height of the separation lever Inconsistent, should be adjusted. For newly riveted friction plate clutches, check whether the driven and friction plates are too thick. If the separation lever height, still not completely separated, we must check the lever height. The separation lever transferred to the same height, if completely separated, indicating that the original improper adjustment or wear too. After the release lever adjustment, the clutch pedal must be readjusted. If the above adjustment is still normal after the separation is not complete, remove the clutch, check the driven disc is mounted anti-axial displacement is difficult, whether the master and slave disc warpage, the separation of the lever screw is loose, whether the floating pin off .

Through our introduction, your understanding of the clutch on the car should be more understanding of it. If you want to learn more about the performance of this product, then come to our company to see it, our staff will bring you the most enthusiastic service. Thank you for your attention to our company.


This article URL:http://www.jsyongyu.com/en/news/343.html

Related tags:汽车塑料配件

prev:None
next:The role of clutch

Recently Viewed:

s
e
r
v
i
c
e
share 一键分享